Konsorcjum Stali S.A.
Spotkanie Przyjaciół i Mecenasów ASP
19
cze
2024
...............
Więcej
Pręty okrągłe gładkie
Smooth round bars:
Bar dimensions:
Table of theoretical weights for smooth round bars
| Diameter d | Weight 1 lm [kg] |
| 10 | 0.62 |
| 12 | 0.88 |
| 13 | 1.04 |
| 14 | 1.21 |
| 15 | 1.39 |
| 16 | 1.58 |
| 18 | 2.00 |
| 20 | 2.47 |
| 22 | 2.98 |
| 24 | 3.55 |
| 25 | 3.85 |
| 26 | 4.17 |
| 27 | 4.49 |
| 28 | 4.83 |
| 30 | 5.55 |
| 32 | 6.31 |
| 33 | 6.71 |
| 34 | 7.13 |
| 35 | 7.55 |
| 36 | 7.99 |
| 37 | 8.44 |
| 38 | 8.90 |
| 40 | 9.87 |
| 42 | 10.9 |
| 43 | 11.4 |
| 45 | 12.5 |
| 46 | 13.0 |
| 47 | 13.6 |
| 48 | 14.2 |
| 50 | 15.4 |
| 52 | 16.7 |
| 53 | 17.3 |
| 55 | 18.7 |
| 58 | 20.7 |
| 60 | 22.2 |
| 63 | 24.4 |
| 65 | 26.0 |
| 70 | 30.2 |
| 73 | 32.8 |
| 75 | 34.6 |
| 78 | 37.4 |
| 80 | 39.4 |
| 85 | 44.5 |
| 90 | 49.9 |
| 95 | 55.6 |
| 100 | 61.7 |
| 105 | 68.0 |
| 110 | 74.6 |
| 120 | 88.8 |
| 130 | 104 |
Notes: The weights shown above are theoretical values that do not take into account the density of a specific alloy or manufacturing tolerances.
* * Upon customer request, it is possible to order bars with diameters above 130 mm. The minimum tonnage for a custom order is subject to agreement.
The presented data may be used for informational purposes only and do not constitute a basis for settlements
Technical conditions of manufacture:
| Bar length | Standard 6 m, lengths up to 18 m available to order. |
| Packing | Bundles weighing from 1.5 t to 2.5 t |
| Delivery condition | Delivered in raw condition (after rolling) |
| Possibility of ordering bars according to dimensional standard | PN-EN 10060 |
Upon customer request, it is also possible to order bars:
- after normalizing rolling;
- after thermomechanical rolling;
- produced according to standards: PN-84/H-93000, PN-85/H-93001, PN-EN 10021, PN-EN 10221, DIN 1013 part 1)
- with confirmation of dimensions and tolerances according to standards: PN-75/H-93200-00, PN-87/H-93200-02, DIN 1013 part 1
- with acceptance tests – internal according to relevant subject standards or external representatives of Classification and Acceptance Societies designated by the customer PRS, LRS, GL, DNV, BV, UDT.
Steel grades:
| Non-alloy structural steels | |
| PN-EN 10025-2 | S235JR, S275JR, S235J2, S275J2, S355J2, S355JR, S235J0, S275J0, S355J0, E295, E335, E360 |
| PN-88/H-84020 | ST3S, ST4S, ST5, ST6, ST7 and others listed in the standard |
| Steel for concrete reinforcement | |
| PN-89/H-84023/06 | St0S-b |
| Non-alloy steels for heat treatment | |
| PN-EN 10083-1 | C22E, C35E, C45E, C55E, C60E |
| PN-EN 10083-2 | C22, C30, C35, C40, C45, C50, C55, C60 |
| Steel for mining link chains | |
| PN-92/H-93028 | 23GHNMA, 23G2NMHA |
| Steel for link chains | |
| PN-89/H-84023/08 DIN 17115 |
23GHNMA, 25GHNMA 27MnSi5 |
| Alloy steel for heat treatment | |
| PN-EN 10083-1 | 25CrMo4, 42Cr4, 42CrMo4, 51CrV4 |
| Alloy steel for heat treatment and surface hardening | |
| PN-89/H-84030/04 | 40H, 40HM |
| Carburizing steel | |
| PN-EN 10084 | C15E, 16MnCr5, 20MnCr4, 20MnCr5 |
| DIN 17210 | C10, C15, 16MnCr5, 20MnCr5, 20MoCr4 |
| PN-89/H-4030/02 | 20HG, 16HG, 20HNM |
| Steel for work at elevated temperatures | |
| PN-EN 10028-2 | 16Mo3 |
| PN-75/H-84024 | 15HM, 16M |
